Blog icon

The challenge

How to clone an engine?

After 100 years, the unique engine block in the only surviving 1914 Delage Type S failed. The car's owner, who was undertaking a painstaking renovation to restore the old car to its former glory, had only the original damaged engine to work with. Remanufacturing a new part without detailed plans was going to be difficult, and using traditional manufacturing methods was not an option.

Our response

Rapid prototyping technology

Delage mould 2016

Not to be thwarted by traditional manufacturing limitations, the restoration team looked to new manufacturing techniques to solve their problem, and discovered that producing this unique part was indeed possible.

Delage GP engine

Working with our partners at WYSIWYG 3D and Keech, a digital copy of the existing engine was made by scanning the original block to accurately capture its every detail. CAD modelling was then used to provide a virtual block that could be checked, simulated and modified as required.

Once finished, the CAD designs were sent to Lab22 at CSIRO's Clayton site, where a sand mould was 3D printed on Australia's only sand printer – the Voxeljet VX1000.

The results

Getting the old girl back on the road

Back at Keech, the mould set was assembled and liquid iron was poured in a trial casting. Areas of improvement were identified and minor design modifications were made to ensure a near perfect cast. The resulting reproduction casting, which was close to a perfect clone of the original, was approved for machining and the final machined block was assembled with original parts before being fitted and tuned by Up the Creek Workshop.

Thanks to additive manufacturing, the last surviving 1914 GP Delage is back in the race!

Delage restored 1978 ©  Phil Guilfoyle

The project was led by Phil Guilfoyle on behalf of the owner Stuart Murdoch. Phil assembled and led the team of WYSIWYG 3D (scanning the original engine block and preparing 3D file for machining and casting), Keech 3D (mould design, CAD), Keech foundry (mould design and casting of cast iron block), Up The Creek Workshop (mechanical work on the Delage and machining of the reproduction engine) and CSIRO (advice on 3D sand printing and printing of the sand moulds using the Voxeljet VX1000).

Our Collaborators

Do business with us to help your organisation thrive

We partner with small and large companies, government and industry in Australia and around the world.

Contact us now to start doing business

Contact us

Find out how we can help you and your business. Get in touch using the form below and our experts will get in contact soon!

CSIRO will handle your personal information in accordance with the Privacy Act 1988 (Cth) and our Privacy Policy.


First name must be filled in

Surname must be filled in

I am representing *

Please choose an option

Please provide a subject for the enquriy

0 / 100

We'll need to know what you want to contact us about so we can give you an answer

0 / 1900

You shouldn't be able to see this field. Please try again and leave the field blank.